5.1. As an additive to mineral and synthetic compressor oils (ISO 32, 68, 100) for:

• - portable and stationary rotary vane and screw compressors.
• - single stage , two stage, and multistage reciprocating compressors from but not limited to Ingersoll-Rand, Quincy, Sullair, Atlas Copco and Gardner-Denver

5.2. As an additive to Way Oils approved by Cincinnati Milacron under their p-47 (ISO 68), and P-50( ISO 220) specifications for Way Lubricants in the lubrication of:

• - ways in many types of machine tools, e.g., lathers, planers, shapers, drilling and tapping machines including those where the loads can be very high.
• - enclosed gears.
• - industrial plain and antifrictional bearings.
• - lubrication of chain drives.

5.3. As an additive to Chain Bar Oils for:

• - chainsaws with either hand operated or automatic chain oilers to lubricate the chain, bar and sprocket.
• - chain drivers on: straddle lift lumber carriers,
• motorcycle chains
• lawnmowers
• farm equipment.

5.4. As an additive to Machine Oils, ISO 22, 32, 46, 68, 100, 150, (10%) in volume) for:

• - reduction gears
• - reciprocating air compressors
• - plain and antifriction bearings
• - electric motor bearings.
• - air compressors
• - high speed gears
• - All the machine oils that meet the AGMA Specifications 1, 2, 3, and 4 for gear lubrication